FAST Connectors are factory pre-polished, field installable connectors that completely eliminate the need for hand polishing in the field. Proven mechanical splice technology ensuring precision fibre alignment, a factory pre-cleaved fibre stub and a proprietary index-matching gel combine to offer an immediate low loss termination to either single-mode or multimode optical fibres.

FAST Connectors are compatible with 250µm and 900µm optical fibres, as well as 2mm, and 3mm cordage. All primary fibre types are supported, and each connector is color coded per industry standard requirements to aide in identification during and after installation.

A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination. Incorporated into this device is an innovative, translucent wedge enabling the use of a common VFI to provide a “pass/fail” signal once physical contact is achieved.

Watch a video demonstration here

• Pre-stubbed, factory-polished ferrule
• No epoxy required
• Precision mechanical alignment insures low loss
• Fibre can be re-seated
• VFI can be used to confirm fibre is installed properly
• Meets TIA/EIA 568A performance requirements
• Meets TIA/EIA 604 (focis) connector interface requirements
  
  

• Premise environments
• Connections at the desk for LAN environments
• Patch panels
• Direct equipment termination
• Fibre to the Subscriber (FTTx) applications
• Repair/replacement requirements
• Equipment test leads

Get a free sample of our new FAST Connectors to see for yourself how easy it is to install.

PLEASE CONTACT BRIAN LEONARD on 0208 240 2006 for further information and sample
bleonard@fujikura.co.uk