product_product.xslt

Product Code: Power & Control cables

Power & Control cables

With more than a century of invaluable experience, Power and Control cables remains at the heart of Fujikura's core competency - cementing our position as one of the world's largest and most experienced cable manufacturers. We are able to offer a comprehensive range of Low to Medium Voltage cables (up to 33kV) which are compliant with a wide range of standards and highly customised to specific requirements.

For more information regarding our Cables or for quotations, please contact us at: metalcables@fujikura.co.uk

 

Read full description

 

Fujikura's cables are made to the highest standards by our Japanese and Malaysian factories and are able to withstand the harshest conditions with great durability, reliability and safety. Our cables have demonstrated outstanding performance in a wide range of condition such as:

  • Directly buried underground
  • Installed within underground ducts
  • Above ground and fastened securely to cable ladder rack or
    tray and in open air (exposed to direct sunlight)
  • In trenches (back-filled with sand)
  • In conduit

Fujikura offers the following power cable standards:

 

Cable Type

British Standard (BS)

IEC Standard

Power

600/1000V

600/1000V

IEC 60502-1

1900/3300V

1.9/3.3kV

3800/6600V

3.6/6kV

 

 

IEC 60502-2

6350/11000V

6/10kV

8700/15000V

8.7/15kV

12700/22000V

12/20kV

19000/33000V

18/30kV

Control

 

0.6/1kV

IEC 60502-3

 

Conductor

The conductors used are plain annealed copper stranded wires. The wires are available in either class 2 or class 5 in accordance to the IEC 60228 standard.

The conductors are further classified into the following types:

1)      Concentric or circular stranded

2)      Unidirectional lay

3)      Compacted Conductor

4)      Flexible Conductor

 

Insulation Material

Depending on the operating temperature, the following types of insulation materials are available:

  • Polyethylene (PE) up to 70°C
  • Polyvinyl Chloride (PVC) up to 70°C
  • Cross-linked Polyethylene (XLPE) up to 90°C
  • Ethylene Propylene Rubber (EPR) up to 90°C

Armour

To ensure adequate physical protection, hard-drawn Aluminium Wire Armoured (AWA) for single core cables and Steel WIre Armoured (SWA) for multi-core cables are available.

 

Safety Standards

If required, the cables can be made to several or all of the following safety standards:

  1. Flame Retardant according to IEC 60332-1
  2. Non‑flame/fire propagation according to IEC 60332-3
  3. Fire resistance according to IEC 60331
  4. Low level of smoke emission according to IEC 61034-1/2
  5. Amount of halogen acid gas according to IEC 60754-1
  6. Low limit of acidity of gases according to IEC 60754-2

 

These safety features are especially suited for applications where uncompromising safety is required such as emergency and fire circuits.

 

Cable Markings

Voltage rating and manufacturername are normally embossed on the outer sheath, however, more information may be indelibly marked or embossed.

  • Type of cable
  • Number of conductors and cross section
  • Specified voltage

For more information regarding our Cables or for quotations, please contact us at: metalcables@fujikura.co.uk