product_product.xslt

Product Code: Hilite Miniature VFI

Hilite Miniature Visual Fault Identifier

AFL Test & Inspection HiLite visible red laser source from AFL is designed to troubleshoot faults on fibre optic cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare fibres, as well as poorly mated connectors. They can quickly identify faults in fiber optic jumper cables, distribution frames, patch panels, and splice trays.

Many fibre network defects occur within the first few meters - within typical OTDR dead zones.

Fujikura Europe is the authorised distributor for AFL test & measurement products in the UK. In addition, Fujikura Europe is the approved calibration & repair centre for AFL AFL Test & Inspection products in Europe.

For information on ordering Test and Inspection equipment, including Fujikura discount offers on AFL Test & Inspection products available in the UK please click here.

Read full description

 

HiLite is an excellent complement to any OTDR because it can locate faults inside the OTDR's dead-zone. Other applications include end-to-end continuity checks, as well as identifying connectors in patch panels and fibers during splicing operations. The universal connector interface mates with many connector styles without needing an adapter.

Trace cables in crowded or un-documented setups. A HiLite is a quick means of finding the "other end" from amongst cluttered cables. Simply connect to one end and look for the visible red light transmitted out the opposite connector.

 

A HiLite Visible Fault Identifier (VFI) -- or Visual Fault Locator (VFL) -- is an essential tool for fiber installation and maintenance technicians.



  • Wavelength: 650 nm +/-20 nm
  • Output Power: 1 mW (into 9/125 single-mode fiber)
  • Safety: Class II Laser Product
  • Key-chain sized
  • Universal 2.5 mm adapter included
  • Universal 1.25 mm adapter available
  • 5-Year Product Warranty
  • 3-Year Recommended Calibration Interval

 HiLite Model Configuration 

Model
Description
VFI3-00-0900PR
HiLite with 2.5 mm Universal Connector
VFI3-01-0900PR
HiLite with 2.5 mm and 1.25 mm Universal Connectors
 

HiLite Replacement Port Adapters

Model
Description
2900-50-0007MR
2.5 mm Universal for HiLIte port (Accepts FC, SC, ST, etc.)
2900-50-0010MR
1.25 mm Universal for HiLite port (Accepts LC & MU)